研究内容 機械 メンバー 論文一覧 イベント
 

 

 

 

 
主要原著論文

 2016 2015 2014 2013 2012 2011 2010 2009 2006 2005 2004 2000 1999 1997

2016
走査型ホール顕微鏡の開発と構造材料の損傷評価

1. Katsuyuki KIDA, Masayuki ISHIDA, Mika FURUSE, Koshiro MIZOBE and Edson Costa SANTOS,
Effect of plastic deformation on magnetic fields around fatigue crack tips of carbon tool steel (JIS, SKS93),
International Journal of Fatigue, Vol. 88, (2016, July), pp. 156-165.
doi:10.1016/j.ijfatigue.2016.03.022    ISSN: 0142-1123.

2. Katsuyuki Kida, Tatsurou Nakashima and Masayuki Ishida,
Changes in magnetic flux density distributions of chromium molybdenum steel (JIS, SCM440) by slit opening and crack growth,
Key Engineering Materials, Vol. 703, (2016, August), pp. 376-379.
doi:10.4028/www.scientific.net/KEM.703.376. ISSN: 1662-9795.


高炭素鋼の微細化および数理ホモロジ―解析
3. Hitoshi Mahara, Katsuyuki Kida, Koshiro Mizobe, Kazuaki Nakane,
Image Analysing Method to Detect Vague Boundaries by Using Reaction--Diffusion System,
Applied Numerical Mathematics
 (in press)

4. K. Nakane, H. Mahara, K. Kida,
An Image Analyzing Method for the Vaguely Grain Boundary Detection by a Reaction Diffusion System,
Procedia Materials Science 12 ( 2016, Dec. ) 72 – 76.

doi: 10.1016/j.mspro.2016.03.013. ISSN: 2211-8128.

5. Isamu Yoshida, Katsuya Yamamoto, Kenta Domura, Koshiro Mizobe and Katsuyuki Kida,
Observation of retained austenite amount of repeatedly  induction heated SUJ2 bearing steels,
Materials Science Forum, Vol. 867, (2016, August), pp. 55-59.
Doi: 10.4028/www.scientific.net/MSF.867.55.  ISSN: 1662-9752.

6. Takayuki Kamiya, Yuuki Hashizume, Koshiro Mizobe and Katsuyuki Kida,
Effect of repeated quenching on rolling contact fatigue properties of JIS SUJ2 bearing steel,
Materials Science Forum, Vol. 867, (2016, August), pp. 60-65.
Doi: 10.4028/www.scientific.net/MSF.867.60.  ISSN: 1662-9752. 


樹脂軸受の開発
7. XiaoChen SHI, Masaya ORITO, Yuji KASHIMA, Koshiro MIZOBE and Katsuyuki KIDA,
Observation of cracks of PEEK polymer thrust bearings under rolling contact fatigue in water,
Key Engineering Materials, Vol. 703, (2016, August), pp. 172-177.
doi:10.4028/www.scientific.net/KEM.703.172. ISSN: 1662-9795.

8. XiaoChen SHI, Masatoshi ANDO, Yuji KASHIMA and Katsuyuki KIDA,
Crack observation of PPS polymer thrust bearings under RCF test in water,
Key Engineering Materials, Vol. 703, (2016, August), pp. 178-182.
doi:10.4028/www.scientific.net/KEM.703.178. ISSN: 1662-9795.
9. XiaoChen SHI, Takayuki KAMIYA, Yuji KASHIMA and Katsuyuki KIDA,
Relationship between failure and temperature of PTFE thrust bearings under dry condition,
Key Engineering Materials, Vol. 703, (2016, August), pp. 183-186.
doi:10.4028/www.scientific.net/KEM.703.183. ISSN: 1662-9795. Best paper Award

10.  Koshiro MIZOBE, Naoki FUJIMURA, Yuji KASHIMA and Katsuyuki KIDA,
Effect of new pocket design on the failure of thrust UHMWPE bearings in dry condition,
Key Engineering Materials, Vol. 703, (2016, August), pp. 192-196.
doi:10.4028/www.scientific.net/KEM.703.192. ISSN: 1662-9795.

11.  Koshiro MIZOBE, Toshihiko MATSUMURA, Yuji KASHIMA and Katsuyuki KIDA,
Rolling contact fatigue observation of radial PPS bearings under dry condition,
Key Engineering Materials, Vol. 703, (2016, August), pp. 197-201.
doi:10.4028/www.scientific.net/KEM.703.197. ISSN: 1662-9795.

12.  Masaya ORITO, Katsuyuki KIDA, Yuuki HASHIZUME, Masayuki ISHIDA, Koshiro MIZOBE and Yuji KASHIMA,
Effect of Groove Geometry on Rolling Contact Fatigue of PEEK Thrust Bearings in Water,
Materials Science Forum (ISSN: 1662-9752), Vol. 878, pp 117-121.
doi:10.4028/www.scientific.net/MSF.878.117. Best paper Award

13. Hitonobu KOIKE, Genya YAMAGUCHI, Koshiro MIZOBE, Yuji KASHIMA, and Katsuyuki KIDA ,
Observation of fatigue fracture on PEEK shaft against alumina bearing’s ball under one-point rolling contact,
Materials Science Forum (ISSN: 1662-9752), Vol. 878, pp 137-141
doi:10.4028/www.scientific.net/MSF.878.137.

14. Hitonobu KOIKE, Toshihiko MATSUMURA, Koshiro MIZOBE, Yuji KASHIMA and Katsuyuki KIDA,
Evaluation of tribological thermal failure on PEEK-PTFE hybrid alumina ball bearing,
Materials Science Forum (ISSN: 1662-9752), Vol. 878, pp 142-147

doi:10.4028/www.scientific.net/MSF.878.142.

小型独立関節の疲労評価
15. Katsuyuki Kida, Kota Kawai, Koshiro Mizobe, Hitonobu Koike and Kenji Kanemasu,
Backlash evaluation of hybrid UHMWPE-PEEK bushes in a small robot joint system,
Key Engineering Materials, Vol. 703, (2016, August), pp. 187-191.
doi:10.4028/www.scientific.net/KEM.703.187. ISSN: 1662-9795. Best paper Award


2015
樹脂軸受の開発
16. Hitonobu KOIKE, Katsuyuki KIDA, Koshiro MIZOBE, Xiaochen SHI, Shunsuke OYAMA and Yuji KASHIMA,
Wear of hybrid radial bearings (PEEK ring- PTFE retainer and alumina balls) under dry rolling contact,
Tribology International, Vol. 90, (2015, October), pp. 77-83

DOI information: 10.1016/j.triboint.2015.04.007


2014
走査型ホール顕微鏡の開発と構造材料の損傷評価
17. Takashi Honda, Edson Costa Santos and Katsuyuki Kida,

Scanning Hall probe microscopy of residual magnetic fields around plastic deformation of
Vickers indentations in carbon tool steel (JIS, SKS93)
,
Mechanics of Materials (Elsevier, ISSN: 0167-6636), Vol. 69, Issue 1, (February 2014), Pages 262–269.
DOI: 10.1016/j.mechmat.2013.07.022.
18. Katsuyuki Kida, Megumi Uryu, Takashi Honda, Edson Costa Santos, and Kenichi Saruwatari,

Three-Dimensional Observation of Magnetic Fields in Alloy Tool Steel under Spherical Hertzian Contact
,
Materials Research Innovations (Maney publishing, Print ISSN: 1432-8917,Online ISSN: 1433-075X)
(2014, March), Vol. 18, Issue Supplement1, pp. 71-75. DOI 10.1179/1432891713Z.000000000358.
19. Katsuyuki Kida, Takashi Honda, Edson Costa Santos, Kenichi Saruwatari, Megumi Uryu, Keisuke Houri,
Hirotaka Tanabe and Kenji Kanemasu,

Three-dimensional Magnetic Microscopy of Early Stage Fatigue in WMZ of Low Carbon Steel Plates (JIS-SS400)
,
Materials Research Innovations (Maney publishing, Print ISSN: 1432-8917,Online ISSN: 1433-075X)
(2014, March), Vol. 18, Issue Supplement1, pp. 66-70. DOI 10.1179/1432891713Z.000000000357.
20. Katsuyuki Kida, Mesugmi Uryu, Takashi Honda and Edson Costa Santos,
Changes in Three-dimensional Magnetic Fields of Star shaped JIS-SKS93 Plates Embedded in
Clear Acrylic Cold Mounting Resin under Tensile Loads
,
Materials Research Innovations (Maney publishing, Print ISSN: 1432-8917,Online ISSN: 1433-075X)
(2014, March), Vol. 18, Issue Supplement1, pp. 89-93. DOI 10.1179/1432891713Z.000000000346.

高炭素鋼の微細化
21. Koshiro MIZOBE, kazutomo OKAMOTO, Kenji KANEMASU, Takuya SHIBUKAWA and Katsuyuki KIDA,
Observation of rolling contact fatigue of induction-heated 13Cr-2Ni-2Mo stainless steel under reciprocating motion, Materials Research Innovations (Maney publishing, Print ISSN: 1432-8917,Online ISSN: 1433-075X)
(2014, August 22), Vol. 18, Issue Supplement 5, pp. S52-S56
DOI: http://dx.doi.org/10.1179/1432891714Z.000000000907.
22. Koshiro Mizobe, Takashi Honda, Hitonobu Koike, Edson Costa Santos, Takuya Shibukawa, Katsuyuki Kida,
Relationship between repeatedly quenching and fisheye cracks around TiN and
Al2O3 inclusions in high carbon bearing steel
,
Materials Research Innovations (Maney publishing, Print ISSN: 1432-8917,Online ISSN: 1433-075X)
(2014, March), Vol. 18, Issue Supplement1, pp. 60-65. DOI 10.1179/1432891713Z.000000000355.
23. Koshiro Mizobe, Wakana Matsuda, Masayuki Matsushita, Takuya Shibukawa and Katsuyuki Kida,
Effect of Twice Quenching on Prior Austenite Grains and Rotating Bending Fatigue Cracks in SUJ2 Steel,
Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336),
Volume 620, pp.443-448, (July, 2014). Doi:10.4028/www.scientific.net/AMM.620.443.

転がり疲労および,複雑な応力下におけるセラミックスの疲労
24. Katsuyuki Kida, Takashi Honda and Edson Costa Santos,
Effect of Stress Ratio on Surface Crack Growth from Small Indentations
n a Silicon Nitride Square Bar under Cyclic Torsion
,
Materials Research Innovations (Maney publishing, Print ISSN: 1432-8917,Online ISSN: 1433-075X)
(2014, August 22), Vol. 18, Issue Supplement 5. pp. S1–S4.
DOI:http://dx.doi.org/10.1179/1432891714Z.000000000897.
25. Katsuyuki Kida, Shintaro Hazeyama,Takuma Sado, Koshiro Mizobe and Takuya Shibukawa,
Crack Initiation Observation in Early Stage of Rolling Contact Fatigue of SUJ2 using a Single-Ball Apparatus,
Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336),
Volume 620, pp.421-424, (July, 2014). Doi:10.4028/www.scientific.net/AMM.620.421.

樹脂軸受の開発
26. Xiaochen SHI, Katsuyuki KIDA, and Yuji KASHIMA,
Surface crack growth of PPS polymer thrust bearings under rolling contact fatigue in water,
Materials Research Innovations (Maney publishing, Print ISSN: 1432-8917,Online ISSN: 1433-075X)
(2014, August 22), Vol. 18, Issue Supplement 5, pp. S42–S47.
DOI: http://dx.doi.org/10.1179/1432891714Z.000000000905.

小型独立関節の疲労評価
27. Hitonobu Koike, Kenji Kanemasu, Kiyoto Itakura, Shota Okazaki, Masahiro Takamiya, Edson Costa Santos, Katsuyuki Kida,
Measurement of fatigue and wear of PEEK bush and A7075 cam plate in humanoid robot joints,
Materials Research Innovations (Maney publishing, Print ISSN: 1432-8917,Online ISSN: 1433-075X)
(2014, March), Vol. 18, Issue Supplement1, pp. 38-43. DOI 10.1179/1432891713Z.000000000363.

組織・破面の画像解析
28. Kazuaki Nakane, Edson Costa Santos, Takashi Honda, Koshiro Mizobe and Katsuyuki Kida,
Homology Analysis of Structure of high carbon bearing steel: Effect of Repeated quenching on Prior Austenite Grain Size, Materials Research Innovations (Maney publishing, Print ISSN: 1432-8917,Online ISSN: 1433-075X) (2014, March), Vol. 18, Issue Supplement1, pp. 33-37. DOI: http://dx.doi.org/10.1179/1432891713Z.000000000353.

レーザーを用いた表面改質および,腐食評価等
29. Katsuyuki Kida, Koretomo Okamoto, Masayuki Ishida, Koshiro Mizobe and Takuya Shibukawa,
Observation of Corrosion Resistance of 13Cr-2Ni-2Mo Stainless Steel Quenched by Induction Heating,
Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336),
Volume 597, pp.140-143, (July, 2014). Doi:10.4028/www.scientific.net/AMM.597.140.

2013
樹脂軸受の開発
30. Ranjith-Kumar Sreenilayam-Raveendran, Michael H. Azarian, C. Morillo, Michael G. Pecht, Katsuyuki Kida, E.C. Santos, Takashi Honda, Hitonobu Koike,
Comparative evaluation of metal and polymer ball bearings,
Wear (Elsevier, ISSN: 0043-1648), Vol. 302, Issue 1-2, (April, 2013), pp. 1499-1505. DOI: 10.1016/j.wear.2013.01.057.
31. Shunsuke Oyama, Katsuyuki Kida, Hitonobu Koike, Edson Santos and Yuji Kashima,
Surface Profile Observation of PTFE Radial Bearings under Rolling-Contact-Fatigue in Water,
Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336),
Volume 307, pp.337-341, (February, 2013). Doi:10.4028/www.scientific.net/AMM.307.337.
32. Koshiro MIZOBE, Takashi HONDA, Hitonobu KOIKE, Edson Costa SANTOS, Takuya SHIBUKAWA, Katsuyuki KIDA,
Fourier Transform Infrared Spectroscopy for Wear Debris Adhesion on PEEK Bearing Surface,
Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336),
Volume 307, pp.372-376, (February, 2013). Doi:10.4028/www.scientific.net/AMM.307.372.
33. Koshiro Mizobe, Takashi Honda, Hitonobu Koike, Edson Costa Santos, Yuji Kashima and Katsuyuki Kida,
Effect of PTFE retainer on friction coefficient in polymer thrust bearings under dry contact,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680), Vol. 683, pp 90-93. (February, 2013). doi:10.4028/www.scientific.net/AMR.683.90.
34. Shunsuke Oyama, Hitonobu Koike, Yuji Kashima and Katsuyuki Kida,
Influence of load and rotation speed on life of PPS radial bearings under water lubricant conditions,
Advanced material research, (Trance Tech Publications, ISSN: 1022-6680), Vol. 683, pp 439-443. (February, 2013). doi:10.4028/www.scientific.net/AMR.683.439.
35. Hitonobu Koike, Koshiro Mizobe, Shunsuke Oyama, Yuji Kashima, Kenji Kanemasu and Katsuyuki Kida,
Observation of wear on PEEK-PTFE hybrid radial bearings,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680),
Vol. 683, pp 385-390. (February, 2013). doi:10.4028/www.scientific.net/AMR.683.385.
36. Shintaro Hazeyama, Shunsuke Oyama, Katsuyuki Kida, Takashi Honda, Koshiro Mizobe, Hitonobu Koike, Kiyoto Itakura, Yuji Kashima and Kenji Kanemasu,
Relationship between Life, Load and Rotation speed of UHMWPE Bearing under Dry Rolling Contact Fatigue, Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680),
Vol. 683, pp 77-81. (February, 2013). doi:10.4028/www.scientific.net/AMR.683.77.
37. Kiyoto Itakura, Takashi Honda, Shunsuke Oyama, Katsuyuki Kida, Shintaro Hazeyama and Yuji Kashima,

Surface Profile Obsevation of PTFE Thrust Bearings under Rolling Contact Fatigue in Water
,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680), Vol. 683, pp 391-395. (February, 2013). doi:10.4028/www.scientific.net/AMR.683.391.
38. Hitonobu KOIKE, Koshiro MIZOBE, Shunsuke OYAMA, Yuji KASHIMA, Kenji KANEMASU and Katsuyuki KIDA,
Comparison of wear on PEEK-PTFE and PPS-PTFE radial bearings under Rolling Contact Fatigue,
Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336),
Volume 372, pp. 503-506, (August, 2013). Doi:10.4028/www.scientific.net/AMM.372.503.
39. Xiaochen Shi, Koshiro Mizobe, Yuji Kashima and Katsuyuki Kida,
Effect of rotation speeds on friction coefficients of PPS race-PTFE retainer Hybrid polymer thrust bearings
under dry contac
t, Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336),
Volume 418, pp. 205-208, (August, 2013). Doi:10.4028/www.scientific.net/AMM.418.205.

走査型ホール顕微鏡の開発と構造材料の損傷評価
40.
Katsuyuki Kida, Edson Costa Santos, Megumi Uryu, Takashi Honda, Justyna Anna Rozwadowska
and Kenichi Saruwatari,
Changes in magnetic field intensities around fatigue crack tips of medium carbon low alloy steel (S45C, JIS), International Journal of Fatigue (Elsevier, ISSN: 0142-1123), Vol. 56, pp.33-41, (2013, August).
DOI: 10.1016/j.ijfatigue.2013.07.015. /
41. Katsuyuki Kida, Megumi Uryu, Takashi Honda, Teruaki Shimoji, Edson Santos and Kenichi Saruwatari,
Changes in Magnetic Fields in Tool Steel (SKS93, JIS) under Single Tensile Load,
Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336),
Volume 307, pp.144-148, (February, 2013). Doi:10.4028/www.scientific.net/AMM.307.144.
42. Katsuyuki Kida and Takashi Honda,

Observation of Three Dimensional Magnetic Fields of Tool Steel (JIS-SKS93) around Vicker's indentations
,
Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336),
Volume 372, pp.265-269, (August, 2013). Doi:10.4028/www.scientific.net/AMM.372.265.
43. Hirotaka Tanabe, Yui Izumi, Tohru Takamatsu, Jun Shimada, Katsuyuki Kida, Edson Costa Santos,
Effect of Crack Opening on Distribution of Magnetic Flux Density around Fatigue Crack,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680), Vol. 813, pp 20-23. (August, 2013). doi:10.4028/www.scientific.net/AMR.813.20.

高炭素鋼の微細化
44. Koshiro Mizobe, Takashi Honda, Hitonobu Koike, Edson Santos, Takuya Shibukawa and Katsuyuki Kida,

Influence of Repeated Quenching-Tempering on Fisheye Cracks around TiN and Al2O3 Inclusions in SAE 52100 steel
, Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336), Volumes 300-301, pp.1298-1303, (February, 2013). Doi:10.4028/www.scientific.net/AMM.300-301.1298.
45. Koshiro Mizobe, Hitonobu Koike and Katsuyuki Kida,
Influence of thrice-induction-heating and once-quenching on fatigue strength of SAE52100 steel,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680), Vol. 893, pp. 415-418.
(February 19, 2014). doi:10.4028/www.scientific.net/AMR.893.415.

転がり疲労および,複雑な応力下におけるセラミックスの疲労
46. Katsuyuki Kida, Takashi Honda, Yoshihiko Seto, Edson Costa Santos and Takuya Shibukawa,
Single-ball rolling contact fatigue of 13Cr-2Ni-2Mo stainless steels quenched by induction heating method,
Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336), Volumes 300-301, pp.1372-1376, (February, 2013). Doi:10.4028/www.scientific.net/AMM.300-301.1372.
47. Shintaro Hazeyama, Justyna Rozwadowska and Katsuyuki Kida,
Observation of Crack Initiation Direction around Inclusions in SUJ2 under Single-Ball Rolling Contact Fatigue,
Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336), Volume 307, pp.342-346,
(February, 2013). Doi:10.4028/www.scientific.net/AMM.307.342.

小型独立関節の疲労評価
48. Hitonobu Koike, Kenji Kanemasu, Kiyoto Itakura, Ken'Ichi Saruwatari, Justyna Rozwadowska, Megumi Uryu, Edson Santos and Katsuyuki Kida,
Wear and transmission error between PEEK bush and 7075 aluminium alloy cam plate components in robot joints, Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336),
Volume 307, pp.3-8, (February, 2013). Doi:10.4028/www.scientific.net/AMM.307.3.a
49. Kiyoto Itakura, Hitonobu Koike, Katsuyuki Kida and Kenji Kanemasu,
Observation of Wear Surface between pure PEEK and counterpart materials;
Titanium and 7075 aluminum alloy, in Robot Joint
,
Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336) ,
Volume 307, pp.347-351, (February, 2013). Doi:10.4028/www.scientific.net/AMM.307.347.
50. Hitonobu KOIKE, Kenji KANEMASU, Kiyoto ITAKURA, Shota OKAZAKI, Masahiro TAKAMIYA, Katsuyuki KIDA,
Change in backlash of humanoid robot joints under high loaded torque,
Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336),
Volume 372, pp. 507-511, (August, 2013). Doi:10.4028/www.scientific.net/AMM.372.507.
51. Hitonobu KOIKE, Kiyoto ITAKURA, Shota OKAZAKI, Masahiro TAKAMIYA, Kenji KANEMASU and Katsuyuki KIDA,
Measurement of backlash and fatigue wear of PEEK bush in robot joint under middle load,
Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336),
Volume 418, pp. 38-43, (August, 2013). Doi:10.4028/www.scientific.net/AMM.418.38.

組織・破面の画像解析
52. Kazuaki Nakane, Koshiro Mizobe, Edson Costa Santos and Katsuyuki Kida,
The Quantization of the structure of fisheyes via homology method,
Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336),
Volume 307, pp.409-414, (February, 2013). Doi:10.4028/www.scientific.net/AMM.307.409.
53. Kazuaki Nakane, Katsuyuki Kida, Takashi Honda, Koshiro Mizobe and Edson Costa Santos,
Influence of repeated quenching on bearing steel martensitic structure investigated by homology, Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336), Volume 372, pp.270-272, (August, 2013). Doi:10.4028/www.scientific.net/AMM.372.270.
54. Kazuaki Nakane, Koshiro Mizobe, Edson Costa Santos and Katsuyuki Kida,
Quantitative estimates of repeatedly quenched high carbon bearing steel,
Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336),
Volume 372, pp. 273-276, (August, 2013). Doi:10.4028/www.scientific.net/AMM.372.273.
55. Kazuaki Nakane, Katsuyuki Kida, Takashi Honda, Koshiro Mizobe, Edson Costa Santos,
Homology analysis of prior austenite grain size of SAE52100 bearing steel processed by cyclic heat treatment,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680),
Vol. 813, pp 116-119. (August, 2013). doi:10.4028/www.scientific.net/AMR.813.116
56. Kazuaki Nakane, Koshiro Mizobe and Katsuyuki Kida,
Homology estimate of grain size easurement based on the JIS samples,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680),
Vol. 813, pp. 120-123 . (August, 2013). doi:10.4028/www.scientific.net/AMR.813.120.

2012
高炭素鋼の微細化
57. Edson Costa Santos, Katsuyuki Kida, Takashi Honda, Hitonobu Koikea and Justyna Rozwadowska,
Fatigue strength improvement of AISI E52100 bearing steel by induction heating and repeated quenching,
Materials Science (Springer, ISSN: 1068-820X),
Vol.47, Issue 5 (March, 2012), pp. 677-682, Doi: 10.1007/s11003-012-9443-8.
58. Takashi Honda, Edson Costa Santos, Katsuyuki Kida and Takuya Shibukawa,
Changes in the microstructure of 13Cr-2Ni-2Mo stainless steels through the quenching process by induction heating, International Journal of Materials and Product Technology (Inderscience Publishers, ISSN: 0268-1900) Vol. 45, No.1/2/3/4/, pp.31-40 (December, 2012). DOI: 10.1504/IJMPT.2012.051329.
59. Koshiro Mizobe, Edson Santos, Takashi Honda, Hitonobu Koike, Katsuyuki Kida and Takuya Shibukawa,
Observation of non-metallic inclusions on repeatedly quenched SAE52100 bearing steel fracture surfaces,
International Journal of Materials and Product Technology (Inderscience Publishers, ISSN: 0268-1900), Vol. 44, No.3/4, pp.227-239. (November 06, 2012). DOI: 10.1504/IJMPT.2012.050186.

走査型ホール顕微鏡の開発と構造材料の損傷評価
60. Katsuyuki Kida, Edson Costa Santos, Takashi Honda, Hitonobu Koike and Justyna Rozwadowska,
Observation of magnetic flux density around fatigue crack tips in bearing steel
using a SHPM with a three-dimensional small-gap probe
,
international Journal of Fatigue (Elsevier, ISSN: 0142-1123), Vol. 39, pp. 38-43 (June, 2012). doi:10.1016/j.ijfatigue.2011.05.013
61. Katsuyuki Kida, Megumi Uryu, Takashi Honda, Edson Costa Santos and Kenichi Saruwatari,
Asymmetric Change in Three Dimensional Magnetic Fields of Bearing Steel (JIS-SUJ2) under Spherical Hertzian Contact, Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336), Volumes 157 - 158, pp.1031-1037, (February, 2012). Doi: 10.4028/www.scientific.net/AMM.157-158.1031.
62. Katsuyuki Kida, Megumi Uryu, Takashi Honda, Edson Costa Santos and Kenichi Saruwatari,
Effect of Off-center Magnetization Location on Changes in Magnetic Fields under Single Spherical Hertzian Contact, Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680), Vol. 566, pp 103-108.
(September, 2012). doi:10.4028/www.scientific.net/AMR.566.103.)
63. Megumi Uryu, Katsuyuki Kida, Takashi Honda, Edson Santos and Kenichi Saruwatari,
Observation of Magnetic Fields in Medium Carbon Low Alloy Steel JIS S45C under Point Contact Loading,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680), Vol. 566, pp 15-21. (September, 2012). doi:10.4028/www.scientific.net/AMR.566.15.)

樹脂軸受の開発
64. Hitonobu Koike, Katsuyuki Kida, Edson Costa Santos, Justyna Rozwadowska, Yuji Kashima and Kenji Kanemasu,
Self lubrication of PEEK Polymer Bearings in Rolling Contact Fatigue under Radial Loads,
Tribology International (Elsevier, ISSN: 0301-679X), Vol. 49, pp.30-38, (May, 2012) doi:10.1016/j.triboint.2011.12.005.
65. Hitonobu Koike, Katsuyuki Kida, Kenji. Kanemasu, Edson Costa Santos, Justyna Rozwadowska, Megumi Uryu, Kenichi Saruwatari and Takashi Honda,
Influence of wear and thermal deformation on machined PEEK plastic bush and Ti crank shaft,
Polymers and Polymer Composites (ISMITHERS, ISSN: 0967-3911), Vol. 20, No.1-2, pp. 117-122. (January, 2012).
66. Hitonobu Koike, Katsuyuki Kida, Kenji Kanemasu, Kiyoto Itakura, Ken'Ichi Saruwatari, Justyna Rozwadowska and Megumi Uryu,
Influence of wear and backlash on machined PEEK polymer bushes and
7075 Aluminium alloy cam plates used in robot joints
,
Applied Mechanics and Materials (Trance Tech Publications, ISSN: 1660-9336),
Volumes 157 - 158, pp.1178-1185. (February, 2012). Doi: 10.4028/www.scientific.net/AMM.157-158.1178.
67. Koshiro Mizobe, Takashi Honda, Hitonobu Koike, Edson Santos, Katsuyuki Kida and Yuji Kashima,
Relationship between load, rotation speed and, strength in all - PEEK and
PEEK race – PTFE retainer hybrid polymer bearings under dry rolling contact fatigue
,
Advanced Materials Research (ISSN: 1022-6680. Trance Tech Publications), Vol. 567, pp. 66-70.
(September, 2012). doi:10.4028/www.scientific.net/AMR.567.66)
68. Koshiro Mizobe, Takashi Honda, Hitonobu Koike, Edson Costa Santos, Katsuyuki Kida and Yuji Kashima,
Effect of thrust load and rotation speed on wear loss in PPS race – PTFE retainer
hybrid polymer thrust bearings under dry contact
,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680), Vol. 566, pp 157-161.
(September, 2012). doi:10.4028/www.scientific.net/AMR.566.157.)
69. Shunsuke Oyama,Katsuyuki Kida, Edson Costa Santos,Hironobu Koike,Takashi Honda and Yuji Kashima,
Observations of Cracks from Microscopic Holes of PEEK Bearings under Rolling-Contact Fatigue in Water,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680), Vol. 566, pp 197-202.
(September, 2012). doi:10.4028/www.scientific.net/AMR.566.197.)
70. Hitonobu Koike, Katsuyuki Kida, Takashi Honda, Koshiro Mizobe, Shunsuke Oyama, Justyna Rozwadowska,
Yuji Kashima and Kenji Kanemasu,
Observation of crack propagation in PEEK polymer bearings under water-lubricated conditions,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680), Vol. 566,
pp 109-114. (September, 2012). doi:10.4028/www.scientific.net/AMR.566.109. )

転がり疲労および,複雑な応力下におけるセラミックスの疲労
71. Kazuya Hashimoto, Kazuhiko Hiraoka, Katsuyuki Kida and Edson Costa Santos,
Effect of sulphide inclusions on rolling contact fatigue life of bearing steels,
Materials Science and Technology, (Maney Publishing, ISSN: 0267-0836, SCI), Vol.28, No. 1, pp.39-43,
(January, 2012). DOI: doi: 10.1179/1743284711Y.0000000062.
72. Shintaro Hazeyama, Justyna Rozwadowska, Katsuyuki Kida, Edson Costa Santos, Takashi Honda, Kenji Kanemasu and Takuya Shibukawa,
Observation of Crack Initiation from Inclusions in Rolling Contact Fatigue Tested Specimens,
using a Newly Developed Single-Ball Testing Device
,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680), Vol. 566, pp 182-186.
(September, 2012). doi:10.4028/www.scientific.net/AMR.566.182.
73. Masatoshi Koga, Edson C.Santos, Takashi Honda, Katsuyuki Kida and Takuya Shibukawa,

Investigation of wear in induction-heated AISI E 52100 steel bars under reciprocating motion
,
International Journal of Materials and Product Technology (Inderscience Publishers, ISSN: 0268-1900),
Vol. 44, No.3/4, pp. 240-251. (November 06, 2012). DOI: 10.1504/IJMPT.2012.050185.

小型独立関節の疲労評価
74. Kiyoto Itakura, Hitonobu Koike, Katsuyuki Kida and Kenji Kanemasu,
Measurement of Joint Element Transmission Error in a Humanoid Walking Robot,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680), Vol. 566, pp 348-352.
(September, 2012). doi:10.4028/www.scientific.net/AMR.566.348.

レーザーを用いた表面改質および,腐食評価等
75. Edson Costa Santos, Justyna Rozwadowska, Katsuyuki Kida, Takashi Honda, Koshiro Mizobe,
Yuji Kashima, Ryo Matsumoto and Chun Guo,
Comparison between the RCF performance of TiN- and TiO2-laser coated Ti64 bearings,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680), Vol. 566, pp 308-312.
(September, 2012). doi:10.4028/www.scientific.net/AMR.566.308.
76. Edson Costa Santos, Katsuyuki Kida, Justyna Rozwadowska, Masaaki Kidera, Changjun Chen,
Epitaxial growth of Ni-based superalloys using laser and spark deposition,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680), Vol. 418-420, pp.1564-1569
(January, 2012). Doi: 10.4028/www.scientific.net/AMR.418-420.1564.
77. Justyna Rozwadowska, Katsuyuki Kida, Edson Costa Santos, Takashi Honda,
Hitonobu Koike, Yuji Kashima and Ryo Matsumoto,
Coating of Ti64 bearings in air by using a Q-sw laser,
Materials Processing Technology, Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680),
Vols. 418-420 (January, 2012) pp 393-397. doi:10.4028/www.scientific.net/AMR.418-420.393

2011
転がり疲労および,複雑な応力下におけるセラミックスの疲労
78. Kazuya Hashimoto, Takeshi Fujimatsu, Norimasa Tsunekage, Kazuhiko Hiraoka,
Katsuyuki Kida and Edson Costa Santos,
Study of rolling contact fatigue of bearing steels in relation to various oxide inclusions,
Materials and Design (Elsevier, ISSN: 0261-3069, SCI), Vol. 32, 3 (March, 2011)
pp. 1605-1611.doi:10.1016/j.matdes.2010.08.052.
79. Kazuya Hashimoto, Takeshi Fujimatsu, Norimasa Tsunekage, Kazuhiko Hiraoka,
Katsuyuki Kida and Edson Costa Santos,
Effect of inclusion/matrix interface cavities on internal-fracture-type rolling contact fatigue life,
Materials and Design (Elsevier, ISSN: 0261-3069, SCI), Vol.32, No.10, pp. 4980-4985,
(December, 2011). Doi: 10.1016/j.matdes.2011.06.056.
80. Katsuyuki Kida, Takashi Honda and Edson Costa Santos,
Semi-circular Surface Cracks and Flaking Failures in Silicon Nitride Bearings,
Advanced Materials Letters (VBRI Press, ISSN : 0976-3961), Vol.2, No.4, pp.336-340.
(November, 2011). doi: 10.5185/amlett.2011.5042am2011.
81. Katsuyuki Kida,
Flaking Failure in Silicon Nitride under Reciprocating Rolling Contact Fatigue,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680), Vol. 217-218
(March, 2011) pp.866-873. doi:10.4028/www.scientific.net/AMR.217-218.866
82. Edson Costa Santos, Katsuyuki Kida, Takashi Honda, Justyna Rozwadowska,
Keisuke Houri and Kazuya Hashimoto,
Influence of cyclic heat treatment and oxygen content on the rolling contact fatigue of SAE 52100 bearings,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680), Vol. 217-218
(March, 2011) pp.982-987. doi:10.4028/www.scientific.net/AMR.217-218.982.
83. Katsuyuki Kida, Junnosuke Koga, Edson Costa Santos and Takashi Honda,
Effect of frequency on fatigue cracks of silicon nitride balls under cyclic loads,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680), Vol. 217-218
(March,2011) pp.874-880. doi:10.4028/www.scientific.net/AMR.217-218.874

樹脂軸受の開発
84. Hitonobu Koike, Takashi Honda, Katsuyuki.Kida, Edson Costa Santos, Justyna Rozwadowska,
Keisuke Houri, Megumi Uryu, Yuji Kashima and, Kenji Kanemasu,
Influence of radial load on PEEK plastic bearings life cycle under water lubricated conditions,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680) Vol. 217-218
(March, 2011) pp.1260-1265. doi:10.4028/www.scientific.net/AMR.217-218.1260

走査型ホール顕微鏡の開発と構造材料の損傷評価
85. Megumi Uryu, Katsuyuki Kida, Takashi Honda, Edson Costa Santos and Kenichi Saruwatari,
Localization of Partial Magnetization around Artificial Slit of Square Bar of Medium Carbon Low Alloy Steel (JIS, S45C), Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680), Vol. 217-218
(March, 2011) pp.1297-1302. doi:10.4028/www.scientific.net/AMR.217-218.1302.
86. Takashi Honda, Katsuyuki Kida , Edson Costa Santos, Justyna Rozwadowska and Megumi Uryu,
The observation of changes in the magnetic field due to the crack initiation under different stress ratio conditions, Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680) Vol. 217-218 (2011)
pp.1408-1413. doi:10.4028/www.scientific.net/AMR.217-218.1408)
87. Hirotaka Tanabe, Katsuyuki Kida, Tohru Takamatsu, Naoki Itoh and Edson Costa Santos,
Observation of Magnetic Flux Density Distribution around Fatigue Crack and Application to
Non-Destructive Evaluation of Stress Intensity Factor
,
Procedia Engineering (Elsevier, ISSN: 1877-7058), Vol. 10,( April, 2011), pp. 881-886. doi:10.1016/j.proeng.2011.04.145

走査型ホール顕微鏡の開発と構造材料の損傷評価
88. Hitonobu Koike, Edson Santos, Katsuyuki Kida, Justyna Rozwadowska and Takashi Honda,
Effect of Repeated Induction Heating on Fatigue Crack Propagation in SAE 52100 Bearing Steel / Relation between
fish-eye propagation and steps of repeated induction heating in SAE 52100 bearing stee
l,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680), Vol. 217-218
(March, 2011) pp.1266-1271. doi:10.4028/www.scientific.net/AMR.217-218.1266.

2010
樹脂軸受の開発
89. Hitonobu Koike, Takashi Honda, Katsuyuki Kida, Edson Costa Santos, Yuji Kashima and Kenji Kanemasu,
Influence of radial load on PEEK plastic bearings life cycle,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680), Vols. 154-155
(October, 2010) pp. 1288-1291. 10.4028/www.scientific.net/AMR.154-155.1288.
90. Takashi Honda, Katsuyuki Kida , Edson Costa Santos and Yuji Kashima,
The Influence of Surface Texture on Rolling-Contact Fatigue of PEEK Bearings in Water,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680) Vols. 154-155
(October, 2010) pp 1713-1716. 10.4028/www.scientific.net/AMR.154-155.1713.

転がり疲労および,複雑な応力下におけるセラミックスの疲労
91. Katsuyuki Kida,
A simple experimental method to simulate the fracture of faults in earthquakes,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680) Vols. 150-151
(October, 2010) pp. 1444-1447. 10.4028/www.scientific.net/AMR.150-151.1444.
92. Junnosuke Koga, Katsuyuki Kida and Edson Costa Santos,
Effects of Residual Stress on Crack Growth of Silicon Nitride Balls under Cyclic Pressure Loads,
Proceedings of SPIE-The International Society for Optical, 7522 (ISSN: 0277-786X), SPIE, 7522-258,
2010.04. (752225, 2009) doi:10.1117/12.851650.

レーザーを用いた表面改質および,腐食評価等
93. Edson Costa Santos, Katsuyuki Kida, Phil Carroll and Rui Vilar,
Optimization of laser deposited Ni-based single crystal superalloys microstructure,
Advanced Materials Research (Trance Tech Publications, ISSN: 1022-6680),Vols. 154-155 (October, 2010)
pp 1405-1414. 10.4028/www.scientific.net/AMR.154-155.1405.

2009
高炭素鋼の微細化
94. Edson Costa Santos, Takashi Honda and Katsuyuki Kida,
Influence of repeated quenching on the rolling contact fatigue of bearing steel,
Proceedings of SPIE-The International Society for Optical ,7522 (ISSN: 0277-786X),
SPIE 7522-333, 2010.04. (752241, 2009) doi:10.1117/12.852314.

走査型ホール顕微鏡の開発と構造材料の損傷評価
95. Takashi Honda, Katsuyuki Kida, Edson Costa Santos and Hirotaka Tanabe,
Changes in magnetic flux density around fatigue crack tips of carbon tool steels,
Proceedings of SPIE-The International Society for Optical, 7522 (ISSN: 0277-786X),
SPIE 7522-313, 2010.04. (75220R, 2009) doi:10.1117/12.851780.
96. Katsuyuki Kida, Edson Costa Santos, Takashi Honda and Hirotaka Tanabe,
Three dimensional observations of magnetic flux density around fatigue crack tips of bearing steels,
Proceedings of SPIE-The International Society for Optical, 7522 (ISSN: 0277-786X),
SPIE 7522-307,2010.04. (75220U, 2009) doi:10.1117/12.851748.

97.
Katsuyuki KIDA, Hirotaka TANABE and Hideki OKANO,
Changes in magnetic flux density around fatigue crack tips,
Fatigue & Fracture of Engineering Materials & Structures, Blackwell, 32(3), pp.180-188
(March, 2009). DOI:10.1111/j.1460-2695.2008.01307.x.

2006
転がり疲労および,複雑な応力下におけるセラミックスの疲労
98. Katsuyuki KIDA, Kazuhiro YOSHIDOME, Koshiro YAMAKAWA, Hisashi HARADA and Noriyasu OGUMA,

Flaking failures originating from micro-holes of bearings under rolling contact fatigue
,
Fatigue & Fracture of Engineering Materials & Structures, (Blackwell, Online ISSN: 1460-2695), 29,
pp.1021-1030 (December, 2006). DOI: 10.1111/j.1460-2695.2006.01067.x.

2005
転がり疲労および,複雑な応力下におけるセラミックスの疲労
99. Katsuyuki KIDA, Makoto SAITO and Kazuhisa KITAMURA,
Flaking failure originated from a single surface crack in silicon nitride under rolling contact fatigue,
Fatigue & Fracture of Engineering Materials & Structures, Blackwell. 28, pp.1087-1097, (December, 2005).
FFEMS Prize “ The Best Paper in Vol. 28” DOI: 10.1111/j.1460-2695.2005.00947.x
100. Katsuyuki KIDA, Kazuhisa KITAMURA, Hiroyuki CHIBA and Koshiro YAMAKAWA,
Static and fatigue strengths of pre-cracked silicon nitride balls under pressure load,
Int. J. Fatigue, Elsevier, 27, pp. 165-175, (February, 2005). doi:10.1016/j.ijfatigue.2004.05.010
101. 田辺裕貴・三好良夫・高松徹・岩谷真吾・木田勝之,

球-平板接触下における半円形微小表面き裂の応力拡大係数評価
,

日本機械学会論文集(A), Vol. 71, No. 702, pp. 288 - 193, 2005.06.


2004
転がり疲労および,複雑な応力下におけるセラミックスの疲労
102. Katsuyuki KIDA, Toshifumi URAKAMI, Takuto YAMAZAKI and Kazuhisa KITAMURA,
Surface crack growth of silicon nitride bearings under rolling contact fatigue,
Fatigue & Fracture of Engineering Materials & Structures, Blackwell, 27, pp. 657-668,
(August, 2004). DOI:10.1111/j.1460-2695.2004.00786.x
103. Katsuyuki KIDA, Takuto YAMAZAKI, Masamichi SHIBATA, Noriyasu OGUMA and Hisashi HARADA,
Crack Initiation from Micro Surface Holes in Bearings under Rolling Contact Fatigue,
Fatigue & Fracture of Engineering Materials & Structures, Blackwell, 27, pp. 481-493,
(June, 2004). DOI:10.1111/j.1460-2695.2004.00771.x
104. 木田勝之・麻生博行・斉藤誠・小熊規泰・山川耕志郎・原田久,
浸炭したSCM415鋼の長寿命転がり疲労特性とき裂発生深さ,
材料, Vol. 53, No. 5, pp. 487 - 492, 2004.04.
105. 木田勝之・麻生博行,
窒化けい素のせん断応力下におけるき裂進展挙動と転がり疲労下におけるき裂進展挙動
(モードIIで進展する表面き裂の特徴),
 日本機械学会論文集(A), Vol. 70,No. 691, pp. 504 - 509, 2004.03.

2000
106. 木田勝之・小倉敬二,
窒化けい素の球 - 平板接触応力下における接触境界近傍領域の微小表面き裂進展挙動,
日本機械学会論文集(A), Vol. 66, No. 645, pp. 901 - 908, 2000.05.
107. 木田勝之・小倉敬二,
窒化けい素の球-平板転がり接触下におけるはく離き裂進展挙動の破壊力学的考察,
日本機械学会論文集(A), Vol. 66, No. 644, pp. 783 - 790, 2000.04.

1999
108. 木田勝之・小倉敬二,
窒化ケイ素の球 - 平板転がり接触下におけるはく離損傷の発生挙動観察,
材料, Vol. 48, No. 10, pp. 1090 - 1094, 1999.10.

109. 木田勝之・小倉敬二,
窒化ケイ素の球 - 平板接触応力下におけるき裂進展挙動の破壊力学的考察
(接触域中央部における微小表面き裂の進展挙動)
,
   日本機械学会論文集(A), Vol. 65, No. 638, pp. 2113 - 2119, 1999.10.

110. 木田勝之・小倉敬二,
球 - 平板接触下における窒化けい素の微小表面き裂進展挙動と摩耗挙動の観察,
日本機械学会論文集(A), Vol. 65, No. 632, pp. 846 - 852, 1999.04.


1997
111. 三好良夫・小倉敬二・木田勝之,
TiC被覆鋼およびTiN被覆鋼の転がり疲労損傷,
材料,Vol. 46, No. 1, pp. 77 - 83, 1997.01.

 

 トップへ